From: LASSERRE Grégory (gregory.lasserre@xxxxxxxx)
Date: Fri Apr 21 2000 - 12:56:49 GMT-3
Hi guys,
I've got a challenging question i worked on last week regarding HSRP.
The solution is not so trivial, and it took me a while to find the answer
(so i hope you won't find the solution too quickly ;o)
Just let's go :
R1,R2, and R3 routers are full-meshed over FR,
using point-to-multipoint interfaces.
R1 and R2 are also connected via Ethernet.
R3 has an LAN interface (Eth, or Token. As you wish)
You are running HSRP between R1 and R2 ; and R1 is your Active router by
default.
What you want to do is to configure the routers so that
R2 becomes the Active router IF and ONLY IF the DLCI between R1 and R3 fall
down.
Note: You have to run OSPF on the FR cloud (R1, R2, R3 are in Area 0)
Good luck,
and please don't ridiculate me finding the solution in 3 minutes ;o)
Cheers.
Greg.
------------------------------------------------------------------------
Gregory LASSERRE Tel. : +33 1 69 18 98 53
Network Engineer Fax : +33 1 69 28 55 01
ARCHE Groupe SIEMENS Std : +33 1 69 18 32 32
FRANCE
E-mail : gregory.lasserre@arche.fr
------------------------------------------------------------------------
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:15 GMT-3