From: John Conzone (jkconzone@xxxxxxxx)
Date: Wed Apr 19 2000 - 20:07:41 GMT-3
In the past few weeks, I ve had the occasion to use an IP extended
access list on a 53000 and a 7507.
My intent was to allow full IP access bewteen to IP hosts. Here's what
I started out with.
access-list 102 permit IP host 192.168.128.50 host 170.34.2.141
To my knowledge, and according to Cisco cause I called them, this
should allow ALL IP protocols bewteen the to hosts. But it did not
allow telnet or ftp. Only pings.
When I specify TCP, UDP and ICMP, in place of the IP in the above
list, its all good .
Anyone ever run into this?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:14 GMT-3