From: Li Chaoyong (hughcyli@xxxxxxxxxxxxxxxxx)
Date: Wed Apr 19 2000 - 04:21:20 GMT-3
APPLETALK DISTRIBUTE-LIST can only filter RTMP routes, can not filter EIGRP rou
tes. I tried zip-reply-filter, zone information is filtered, but routes is stil
l there.
I don't know how to do.
Help, help.
----- Original Message -----
From: Goh, Winston <winston.goh@sg.unisys.com>
To: 'Li Chaoyong' <hughcyli@holybridge.com.cn>; <ccielab@groupstudy.com>
Sent: Wednesday, April 19, 2000 9:00 AM
Subject: RE: How to filter NETBIOS in DLSW PEER
> Hi,
> For your second question, create a access-list 600-699 permit/deny the cable
> range of the appletalk network. Apply the access-list through appletalk
> distribution-list out under the interface coomand. Remember to permit
> other-access at the end of your acl. i hope this help.cheers
> winston
>
> -----Original Message-----
> From: Li Chaoyong [mailto:hughcyli@holybridge.com.cn]
> Sent: Saturday, April 15, 2000 4:15 PM
> To: ccielab@groupstudy.com
> Subject: How to filter NETBIOS in DLSW PEER
>
>
> I want to know how to configure DLSW peers to allow NETBIOS only.
>
> Use lsap-output-list ?
>
> Please help me.
>
> -----------------------
>
> Another Question
>
> In this condition
>
> R1----------R2
>
> R1 and R2 is runing APPLETALK EIGRP. How to filter EIGRP APPLETALK ROUTE?
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:14 GMT-3