From: John Garrett (John.Garrett.B@xxxxxxxxx)
Date: Tue Apr 18 2000 - 13:53:42 GMT-3
Just after I sent it, I realized what the problem is.
I was using an IBG session & I had not disabled SYNC.
---------------------- Forwarded by John Garrett/IS/US/BAYER on 04/18/2000
12:50 PM ---------------------------
John Garrett/IS/US/BAYER@BAYER-US-NOTES@groupstudy.com on 04/18/2000 12:38:39
PM
Please respond to CN=John Garrett/OU=IS/OU=US/O=BAYER@BAYER-US-NOTES
Sent by: nobody@groupstudy.com
To: "DDA.RFC-822=ccielab@groupstudy.com/P=Internet/A= /C=us"@X400
cc:
Subject: BGP and NSSA Areas
Is there some rule abour redistributing BGP into and NSSA? Simple scenerio:
R1-------R2-------R3
R1 is ospf abr, with area 0 & area 5(nssa) R2 is area 5 nssa with bgp 5
running between r2 & r3. I cannot get the bgp routes to show up in the ospf,
anywhere. I used simple configs, ie, all interfaces on r2 are in ospf, next hop
is reachable, redistribute bgp5 subnets.
When I switch to eigrp between r2 and r3, and redistibute that into the ospf,
I get the external Nx routes that I am looking for.
Any ideas?
John Garrett
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:14 GMT-3