Large Config File

From: Thomas Surber (tsurber@xxxxxxxxxxxxx)
Date: Wed Apr 12 2000 - 17:23:02 GMT-3

• Next message: David Goldsmith: "Re: Large Config File"
• Previous message: Derek Small (Fuse): "Re: Problem with snapshot routing."
• Next in thread: David Goldsmith: "Re: Large Config File"
• Maybe reply: David Goldsmith: "Re: Large Config File"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
   
   Is there a better way of booting from a large config (over 128K) then
   doing like so.
   
   boot config slot0:router-confg
   
   and then saving your running config to slot0:router-confg every time
   you make a change?
   
   The config on two of my routers, 7206VXRs with two frame DS3s and
   about 450 sub interfaces each DS3 is about 210K.
   
   Thomas Surber
BEGIN:VCARD
VERSION:2.1
N:Surber;Thomas
FN:Thomas Surber
ORG:4Front Systems, Inc
TEL;WORK;VOICE:(919) 789-4FSI
ADR;WORK;ENCODING=QUOTED-PRINTABLE:;;320 Glen Royal Road=0D=0ASuite 100;Raleigh
;NC;27612;USA
LABEL;WORK;ENCODING=QUOTED-PRINTABLE:320 Glen Royal Road=0D=0ASuite 100=0D=0ARa
leigh, NC 27612=0D=0AUSA
EMAIL;PREF;INTERNET:thomassurber@hotmail.com
REV:20000412T202302Z
END:VCARD

• Next message: David Goldsmith: "Re: Large Config File"
• Previous message: Derek Small (Fuse): "Re: Problem with snapshot routing."
• Next in thread: David Goldsmith: "Re: Large Config File"
• Maybe reply: David Goldsmith: "Re: Large Config File"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:13 GMT-3