sh isdn status

From: Nnanna Obuba (obuba@xxxxxxxxx)
Date: Mon Apr 03 2000 - 00:25:12 GMT-3

• Next message: Aaron DuShey: "RE: sh isdn status"
• Previous message: Aaron DuShey: "Metric weights IGRP command"
• Next in thread: Aaron DuShey: "RE: sh isdn status"
• Maybe reply: Aaron DuShey: "RE: sh isdn status"
• Maybe reply: Ryan B: "Re: sh isdn status"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
I'm getting a rather unusual message when I type in this command..The link
gets established (but not multi link), yet the output says 'spids not sent'
Can anyone give me a clue as to what is happening here?

TIA

Nnanna

PS here's the output

r2#sh isdn status
Global ISDN Switchtype = basic-ni
ISDN BRI0 interface
        dsl 0, interface ISDN Switchtype = basic-ni
    Layer 1 Status:
        ACTIVE
    Layer 2 Status:
        TEI = 65, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
    Spid Status:
        TEI 65, ces = 1, state = 4(await init)
            spid1 configured, no LDN, spid1 sent, spid1 NOT valid
        TEI Not Assigned, ces = 2, state = 1(terminal down)
            spid2 configured, no LDN, spid2 NOT sent, spid2 NOT valid
    Layer 3 Status:
        1 Active Layer 3 Call(s)
    Activated dsl 0 CCBs = 2
        CCB:callid=0x0, sapi=0x0, ces=0x1, B-chan=0
        CCB:callid=0x1, sapi=0x0, ces=0x1, B-chan=2
    The Free Channel Mask: 0x80000001
    Total Allocated ISDN CCBs = 2

• Next message: Aaron DuShey: "RE: sh isdn status"
• Previous message: Aaron DuShey: "Metric weights IGRP command"
• Next in thread: Aaron DuShey: "RE: sh isdn status"
• Maybe reply: Aaron DuShey: "RE: sh isdn status"
• Maybe reply: Ryan B: "Re: sh isdn status"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:12 GMT-3