From: Jeff Omick (jomick@xxxxxxxxxx)
Date: Sat Apr 01 2000 - 18:17:12 GMT-3
This may have been answered already but here is some imput.
I think you need to associate your dialer to your BRI
on the BRI you need
dialer pool-member 1
and on your dialer int
you need
dialer pool 1
Let me know if this helps
thanks
jeff
Josef Dittli wrote:
>
> Hi all
>
> This is the third try I came with this,
> but I don't get this working!
>
> Below I attach my config (more or less based on the config
> out of the Docu-CD). BUT, no call will be established!
>
> The only debug-output I get, when I try to ping a host in the
> remote network tells me that it is interesting traffic!
> (after the config you can see the debug output)
>
> Where is the problem?
> Thanks in advance for your help!
>
> Josef
>
> CONFIG
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname c700
> !
> !
> !
> ip subnet-zero
> !
> no ip domain-lookup
> isdn switch-type basic-net3
> isdn tei-negotiation first-call
> !
> !
> !
> interface Ethernet0
> ip address 140.10.10.1 255.255.255.0
> no ip directed-broadcast
> !
> interface BRI0
> no ip address
> no ip directed-broadcast
> encapsulation ppp
> dialer rotary-group 1
> isdn switch-type basic-net3
> no fair-queue
> no cdp enable
> ppp bap number default 018391340
> ppp bap number secondary 018833150
> !
> interface Dialer1
> ip unnumbered Ethernet0
> no ip directed-broadcast
> encapsulation ppp
> dialer in-band
> dialer idle-timeout 300
> dialer-group 1
> no fair-queue
> no cdp enable
> ppp authentication chap
> ppp multilink bap
> ppp bap call accept
> ppp bap callback request
> ppp bap timeout pending 20
> ppp bap timeout response 2
> ppp bap max dial-attempts 2
> !
> router rip
> version 2
> redistribute connected metric 5
> network 140.10.0.0
> !
> no ip http server
> ip classless
> ip route 0.0.0.0 0.0.0.0 Dialer1
> !
> dialer-list 1 protocol ip permit
> !
> line con 0
> exec-timeout 0 0
> transport input none
> stopbits 1
> line vty 0 4
> exec-timeout 0 0
> password cisco
> login
> !
> end
>
> DEBUG-OUTPUT
> c700#sh debug
> Dial on demand:
> Dial on demand events debugging is on
> Dial on demand packets debugging is on
> PPP:
> PPP authentication debugging is on
> PPP protocol negotiation debugging is on
> BAP:
> BAP general debugging is on
> ISDN:
> ISDN Q931 packets debugging is on
> c700#ping 200.1.1.5
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 200.1.1.5, timeout is 2 seconds:
>
> 00:11:51: Dialer1 DDR: ip (s=140.10.10.1, d=200.1.1.5), 100 bytes, outgoing
> interesting (ip PERMIT).
> 00:11:53: Dialer1 DDR: ip (s=140.10.10.1, d=200.1.1.5), 100 bytes, outgoing
> interesting (ip PERMIT).
> 00:11:55: Dialer1 DDR: ip (s=140.10.10.1, d=200.1.1.5), 100 bytes, outgoing
> interesting (ip PERMIT).
> 00:11:57: Dialer1 DDR: ip (s=140.10.10.1, d=200.1.1.5), 100 bytes, outgoing
> interesting (ip PERMIT).
> 00:11:59: Dialer1 DDR: ip (s=140.10.10.1, d=200.1.1.5), 100 bytes, outgoing
> interesting (ip PERMIT).
> Success rate is 0 percent (0/5)
> c700#
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:12 GMT-3