From: Derek Small (Fuse) (dwsmall@xxxxxxxxxx)
Date: Fri Mar 31 2000 - 18:23:32 GMT-3
You are probably going to burn more money trying to get this working than if
you just went with one solution or the other. IPSec is a standard but it is
still not implemented in the same way on all equipment. From my experience
with trying to get platforms from multiple vendors to work together I would
at least recommend you try this with certificates.
Thank You
Derek Small
dwsmall@fatkid.com
----- Original Message -----
From: Ron Johnson <rjohnson@ebnetworks.com>
To: <cisco@groupstudy.com>
Cc: <ccielab@groupstudy.com>
Sent: Friday, March 31, 2000 4:05 PM
Subject: VPN - PIX Firewall to Checkpoint Firewall
>
> Has anyone successfully setup a VPN between a PIX (520 w/ 5.03 Software)
and
> a checkpoint firewall (NT v. 4.0 w/ SP5)? If so, how difficult was it to
get
> going? I'm hearing different things about how difficult this is to
> configure. Are there any online resources discussing what's involved in
> setting this up (I have had no luck finding anything online). The
> requirement is to setup a dedicated VPN with a client for extranet access.
>
> I realize this is a bit off topic, but I appreciate your feedback.
>
> Thanks.
>
> -Ron
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:07 GMT-3