From: Earl Aboytes (earl@xxxxxxxxxxxx)
Date: Fri Mar 24 2000 - 02:03:55 GMT-3
We have been working on this in the lab. It appears that eigrp will not establ
ish neighbors over an isdn interface. If you wanted to use floating static rou
tes you would need one for each of your networks since you would not get update
s over the isdn link once it came up.
Earl
---------- Original Message ----------------------------------
From: clou@ebnetworks.com
Date: Thu, 23 Mar 2000 23:49:30 -0500
>
>Earl,
>
>I think you're correct. Floating static is the only answer.
>
>Following this path, I got a question on IPX EIGRP.
>
>If you're asked to configure IPX EIGRP over WAN link, and then
>provide the ISDN backup for IPX over WAN. Since floating static
>is the only tool, do I need to define many static entries for
>every destination network need to be reached?
>
>For example, R1 --- IPX EIGRP --- R2
> | |
> |------- ISDN -------|
>
>Before the WAN link is down, R2 learns IPX net 1000, 2000, ...7000
>from R1 via EIGRP. To configure ISDN backup, on R2, do I need
>multiple entries like
>! R2
>ipx route 1000 bri0 floating-static
>ipx route 2000 bri0 floating-static
>ipx route 3000 bri0 floating-static
>...
>
>or there's a better way to do it?
>
>Thanks,
>
>Chi
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:06 GMT-3