From: Ben_J_Durand@xxxxxxxxxx
Date: Sat Mar 11 2000 - 13:01:24 GMT-3
DLWS+ uses the following ports. Try opening them all and see if it helps:
TCP 179 For connections
TCP 2065 For DLSW+ Write
TCP 2067 For DLSW+ Read
Hope this helps :)
- Ben
Khurram Khani <ajmal@emirates.net.ae> on 03/11/2000 06:06:26 PM
Please respond to Khurram Khani <ajmal@emirates.net.ae>
To: ccielab@groupstudy.com
cc: (bcc: Ben J Durand/Tivoli Systems)
Subject: Permit DLSW in Access-list
Hi.
R1--(serial)----R2 ----(serial)--- R3
In R2 , I applied an Access-list to only permit TCP eq 23. Now I
am trying to permit DLSW as well
I have configured a DLSW Peer between R1 and R3
In R2 , I have put
access-list 101 permit tcp any any eq 2065
access-list 101 permit tcp any any eq 1981
access-list 101 permit tcp any any eq 1982
access-list 101 permit tcp any any eq 1983
access-list 101 permit tcp any any eq telnet
With # show dlsw peer I can clearly see that DLSW State is going
from WAIT to DISC again and again. When I remove access-list it
changes to CONNECT
Any clue?
Khurram.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:04 GMT-3