From: GRIZZUTI Javier (jgrizzut@xxxxxxxxxxxxxx)
Date: Sat Mar 11 2000 - 10:29:23 GMT-3
Ben
I went throught the same problem . If you do it with physical interfaces (
no dialer) it should work .If you want to user dialer interfaces put the
server in a physical interface .
Don't ask me why
Javier Grizzuti
> -----Original Message-----
> From: Ben_J_Durand@tivoli.com [SMTP:Ben_J_Durand@tivoli.com]
> Sent: Friday, March 10, 2000 10:17 PM
> To: ccielab@groupstudy.com
> Subject: Simple callback not working :(
>
> Hi guys,
>
> Help! :) I'm trying to get 2 x 804s to do ISDN ppp callback (no call ID
> stuff)
> and I can't seem to get it to work. The callback server does call back,
> the
> callback client answers the call, but doesn't recognize the callback
> server and
> drops the line. After another period, the callback client says "no calls
> from
> callback server, freeing up dialer 1" or something like that.
>
> First off, let me confirm my commands with you. Regular callin and
> authentication works just fine btw, so it's not an issue with chap or
> anything.
> Here are the commands. Am I missing anything? The key commands being:
> "ppp
> callback request" on the client, "ppp callback accept" on the server, then
> both
> a map-class with "dialer callback-server username" applied on the dialed
> number?
>
> On the callback server:
>
> hostname cp-dialup
> !
> interface Dialer1
> ip address 10.1.1.1 255.255.255.0
> no ip directed-broadcast
> ip nat inside
> encapsulation ppp
> no ip mroute-cache
> dialer remote-name bjdurand-rtr
> dialer idle-timeout 6000
> dialer enable-timeout 5
> dialer string 8761846 class MyMap
> dialer pool 1
> dialer-group 1
> compress stac
> ppp callback accept
> ppp authentication chap
> !
> map-class dialer MyMap
> dialer callback-server username
> dialer idle-timeout 5
> !
> username bjdurand-rtr password cisco
> username cp-dialup password cisco
>
>
> On the callback client:
>
> interface Dialer1
> ip address 10.1.1.2 255.255.255.0
> no ip directed-broadcast
> encapsulation ppp
> no ip mroute-cache
> dialer remote-name cp-dialup
> dialer idle-timeout 6000
> dialer string 5740603 class MyMap
> dialer hold-queue 50
> dialer load-threshold 3 either
> dialer pool 1
> dialer-group 1
> compress stac
> no cdp enable
> ppp callback request
> ppp authentication chap
> !
> map-class dialer MyMap
> dialer callback-server username
> !
> username bjdurand-rtr password cisco
> username cp-dialup password cisco
>
>
> One thing I noticed in "debug dialer" and "debug callback" is that the
> dialed
> number from dialer 1 is 5740603, bt the incoming callback is 3175740603
> which is
> the DN with the area code in front. It didn't think it would matter since
> it's
> supposed to use the username, but it still doesn't work. Any ideas?
> comments?
> I've never played with callback before, so any help or comments are
> welcomed.
>
> Thanks for your help.
>
> - Ben
>
> 18 days to go...
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:04 GMT-3