From: josh@xxxxxxxxxxx
Date: Thu Mar 09 2000 - 18:36:19 GMT-3
I just tried to send a break command to a router using a reverse-telnet
session through a 2509. No luck. Does anyone know how to do it under these
circumstances?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
GRIZZUTI Javier
Sent: Thursday, March 09, 2000 2:18 PM
To: wynnet@msn.com; ccielab@groupstudy.com
Subject: RE: Break keys
Michael THANKS !!!!
I worked with a 2500 too.
Thanks
Javier
> -----Original Message-----
> From: Michael Wynston [SMTP:wynnet@msn.com]
> Sent: Thursday, March 09, 2000 5:10 PM
> To: GRIZZUTI Javier; ccielab@groupstudy.com
> Subject: RE: Break keys
>
> Undocumented. crtl-shift-6-b. This is only nevessary when the access
> server
> is a RISC processor 2600, 3600 etc.
> Michael Wynston
> CCSI 98920, CCIE 5549
> Phone (908)413-5813
> Fax (732) 549-4271
> email: wynnet@msn.com
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> GRIZZUTI Javier
> Sent: Thursday, March 09, 2000 2:40 PM
> To: ccielab@groupstudy.com
> Subject: Break keys
>
>
> Hey all
>
> I can't break the routers booting process from the access server, I tried
> with the regular keys ( ALT-B and Ctrl-Break) and some strange
> combinations
> , no one worked. I'm connected throught telnet to an access server and
> then
> to the routers.
>
> > ----------------------------------------------------------
> > Ing. Javier Grizzuti- Systems Engineer
> > Servicios de Ingeniería de Soporte
> > SoftNet S.A. - Perú 327 1er Piso "A" (1067)
> > Buenos Aires - ARGENTINA
> > Phone: (54-1) 4343-4990 - Ext. 237
> > Fax: (54-1) 4343-9132
> > mailto:jgrizzut@softnet.com.ar
> > http://www.softnet.com.ar
> > ---------------------------------------------------------
> >
> >
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:04 GMT-3