Re: One IP address problem on FR

From: Jeff Omick (jomick@xxxxxxxxxx)
Date: Wed Mar 01 2000 - 13:31:51 GMT-3

Next message: Muralidhar Devarasetty: "Re: OSPF and Secondary Addresses"
Previous message: Mosley, Arthur: "VPN - routing infor"
Maybe in reply to: shaxw: "One IP address problem on FR"
Next in thread: Patrick McKinnis: "RE: One IP address problem on FR"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   You cannot ping a NBMA interface as far as i know.

   Jeff

   shaxw wrote:

      Hi All: I have one FR network, 2 spoke routers connected to the
     hub router.The type of the FR network is Broadcast, and mapping
     between IPaddress and DLCI is defined manually.From the router, it
     can ping the other one, but when it ping its owninterface IP
     address, Failed. Using debug, get the following message:"...
     Encapsulation Failed."What's the problem? Thanks Jack ShaSystem
     Engineershaxw@wafersystems.com

Next message: Muralidhar Devarasetty: "Re: OSPF and Secondary Addresses"
Previous message: Mosley, Arthur: "VPN - routing infor"
Maybe in reply to: shaxw: "One IP address problem on FR"
Next in thread: Patrick McKinnis: "RE: One IP address problem on FR"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:03 GMT-3