From: Sheryl Zhang (sheryl.zhang@xxxxxxxxxxxxxxxx)
Date: Tue Feb 29 2000 - 07:04:31 GMT-3
Hi Randy,
Don't config "lat enable" in your serial port.
When you config LAT over FR, try with "translate" from Lat to TCP.
With command "translate TCP x.x.x.x late servicename" in the router-A which
you config the lat service, and "translat lat servicename tcp x.x.x.x" in rout
er-B which you will use the lat service. Pay attention that x.x.x.x is an ip
address in the subnet of router-A but it is an non-existend IP address.
Best regards./sheryl
At 02:32 PM 2/28/00 -0800, you wrote:
>I have LAT service over Ethernet working, but once I
>enabled lat on serial frame-relay interface, I get
>
>LINK-3-BADMACREG: Interface Serial0, non-existent
>MACADDR registry for link 31
>
>And the service is not announced. Configuring a MAC
>address on serial does not help.
>
>Any ideas?
>
>Thanks.
>Randy
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:54 GMT-3