Re: DLSW+ Ethernet to Tokenring Question

From: Joel W. Ekis (jekis@xxxxxxxxx)
Date: Thu Feb 24 2000 - 16:47:36 GMT-3

• Next message: Thu Phan: "CEF and rate shaper"
• Previous message: Wong, Van: "DLSW+ Ethernet to Tokenring Question"
• Maybe in reply to: Wong, Van: "DLSW+ Ethernet to Tokenring Question"
• Next in thread: Wong, Van: "RE: DLSW+ Ethernet to Tokenring Question"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
At 10:25 AM 2/24/2000 -0800, Wong, Van wrote:
>Hi all,
>
>I have a question about DLSW+. There are two routers, one with with
>ethernet and one with tokenring like below. rtra and rtrb are dlsw tcp
>peers.
>
><ethernet llc2 device>--ethernet--<rtra>--IP cloud--<rtrb>--<tokenring llc2
>device>
>
>If I want to place a "dlsw icanreach mac-add <ethernet llc2 device>" command
>on rtra, do I put in the mac-address in canonical or the dlsw
>native-noncanonical format.

DLSW expects everything to be non-canonical. You must translate the Ethernet M
AC.

>
>And the inverse question too, if I want to place a "dlsw icanreach mac-add
><tokenring llc2 device>" command on rtrb, do I put in the address canonical
>or non-canonical address.

Use the T/R MAC as is.

>
>Thanks,
>Van

• Next message: Thu Phan: "CEF and rate shaper"
• Previous message: Wong, Van: "DLSW+ Ethernet to Tokenring Question"
• Maybe in reply to: Wong, Van: "DLSW+ Ethernet to Tokenring Question"
• Next in thread: Wong, Van: "RE: DLSW+ Ethernet to Tokenring Question"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:54 GMT-3