From: Curtis Phillips (phillipscurtis@xxxxxxxxxxxx)
Date: Sat Feb 19 2000 - 15:06:07 GMT-3
All the pvs are mapped across the switch to a vpi/vci pair on another
interface. Have you tried to configure an pvc with the same interface and
vpi/vci pair for both sides on the switch?
Just a thought....
Curtis
Manuel Berrocal <manueliux@yahoo.com> wrote:
> --- John Garrett <John.Garrett.B@bayer.com> wrote:
> > When multiple PVCs are defined on an ATM interface, I use a map-list to
> > make
> > the remote address reachable. Why can't I ping my own interface address?
That's the normal beahvior in ATM and also in Frame Relay, may be in all
NBMA networks...
> > I even tried a map statement pointing to my address over the same vc,
> > hoping to
> > go out an come pack for a ping, but that did not work either.
I've done this in Frame Relay and it did work! May be you are having an
split-horizon derived problem...
I think your ping should go all the way through the ATM cloud and back
again !!!!!
=====
,---------------------------------------------------------,
! Manuel Berrocal ! Don't THINK you are, !
! ICQ #22528589 ! KNOW you are. !
! Berrocal@bigfoot.com ! -Morpheus, The Matrix !
'---------------------------------------------------------'
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:53 GMT-3