From: Yogesh Kalley (Yogesh_Kalley@xxxxxxxx)
Date: Thu Feb 10 2000 - 18:38:21 GMT-3
Make sure that on Production router you make the access-list before starting th
e
syslog. Otherwise the debug command is applicable to all the packets.
and do undebug all before removing the access-list.
Yogesh
"Stephens, Paul [Prof.Serv]" <Paul.Andrew.Stephens@compaq.com> on 02/10/2000
03:23:38 PM
Please respond to "Stephens, Paul [Prof.Serv]" <Paul.Andrew.Stephens@compaq.com
>
To: "'Curtis Phillips'" <phillipscurtis@netscape.net>, ccielab@groupstudy.com
cc: (bcc: Yogesh Kalley/TheGuardian)
Subject: RE: A simple example or URL.
Hi Curtis
You just put the access list number on the end of the debug command i.e;
Debug ip packet 1
Then in you config have an access list i.e
Access-list 1 permit 10.1.1.1
Hope this helps
Paul Stephens
UK INI Network Consultant
Networks and Systems Integration Services
Compaq Computer Ltd
*mailto:paul.andrew.stephens@compaq.com
<mailto:paul.andrew.stephens@compaq.com>
* Mobile +44 7818 457948
-----Original Message-----
From: Curtis Phillips [mailto:phillipscurtis@netscape.net]
Sent: Thursday, February 10, 2000 16:44
To: ccielab@groupstudy.com
Subject: A simple example or URL.
Does any one have a simple example or a URL describing the
use of access-lists
to filtering debug output?
Apologizing in advance for what may be viewed by some as a
lack of research on
my part.
Regards,
Curtis
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:53 GMT-3