From: Gary Bradford (glbradford@xxxxxxxxxxx)
Date: Wed Feb 02 2000 - 20:39:22 GMT-3
Tagged VLAN Traffic travels on VLAN 1 so it is not possible to remove vlan 1
>From: "Ben Rife" <brife@bignet.net>
>Reply-To: "Ben Rife" <brife@bignet.net>
>To: <ccielab@groupstudy.com>
>Subject: CAT5K Trunking
>Date: Wed, 2 Feb 2000 16:35:06 -0500
>MIME-Version: 1.0
>Received: from [208.242.122.8] by hotmail.com (3.2) with ESMTP id
>MHotMailBA61F50C0041D820F3A5D0F27A082D761; Wed Feb 02 14:05:07 2000
>Received: from localhost (mail@localhost)by groupstudy.com (8.9.3/8.9.3)
>with SMTP id RAA24506;Wed, 2 Feb 2000 17:34:28 GMT
>Received: by groupstudy.com (bulk_mailer v1.12); Wed, 2 Feb 2000 17:34:27
>+0000
>Received: (from listserver@localhost)by groupstudy.com (8.9.3/8.9.3) id
>RAA24500GroupStudy Mailer; Wed, 2 Feb 2000 17:34:27 GMT
>Received: from raq3-08.bignet.net (raq3-08.bignet.net [206.67.107.176])by
>groupstudy.com (8.9.3/8.9.3) with ESMTP id RAA24495GroupStudy Mailer; Wed,
>2 Feb 2000 17:34:24 GMT
>Received: from coolwater (port41.maxt06.bignet.net [207.74.177.41])by
>raq3-08.bignet.net (8.9.3/8.9.3) with SMTP id QAA25462for
><ccielab@groupstudy.com>; Wed, 2 Feb 2000 16:35:10 -0500
>From nobody@groupstudy.com Wed Feb 02 14:09:50 2000
>Message-ID: <01dc01bf6dc5$62b865e0$2deb30cf@datasystems.com>
>X-Priority: 3
>X-MSMail-Priority: Normal
>X-Mailer: Microsoft Outlook Express 5.00.2919.6600
>X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600
>Sender: nobody@groupstudy.com
>
>Hey guys,
>
>I'd like to configure a trunk 1/1 so that it will carry only traffic on
>VLAN4 and VLAN1.
>
>I entered the following on my switch:
>
>Console> (enable) set trunk 1/1 1,4
>Port 1/1 allowed vlans modified to 1-1000
>
>Why does it say 1-1000? Why not 1,4?
>
>Thanks,
>Ben
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:52 GMT-3