From: Ben Rife (brife@xxxxxxxxxx)
Date: Wed Feb 02 2000 - 18:52:40 GMT-3
Thanks, That is pretty sneaky !!!
One more question though...when I re-added the vlans 4 and 5, it also
included the default vlan 1. Why did it do that? Is that avoidable?
Thanks,
Ben
----- Original Message -----
From: "Denton Bobeldyk" <denny@kentwoodps.org>
To: "Ben Rife" <brife@bignet.net>
Cc: <ccielab@groupstudy.com>
Sent: Wednesday, February 02, 2000 4:47 PM
Subject: Re: CAT5K Trunking
> You have to use the 'clear trunk' command to clear out the vlans that
> you don't want that port to trunk for.... sneaky eh?
>
> -Denny
>
> Ben Rife wrote:
>
> > Hey guys,
> >
> > I'd like to configure a trunk 1/1 so that it will carry only traffic on
VLAN4 and VLAN1.
> >
> > I entered the following on my switch:
> >
> > Console> (enable) set trunk 1/1 1,4
> > Port 1/1 allowed vlans modified to 1-1000
> >
> > Why does it say 1-1000? Why not 1,4?
> >
> > Thanks,
> > Ben
> >
>
------------------------------------------------------------------------
> >
> > Part.001Name: Part.001
> > Type: Plain Text (text/plain)
>
> --
> -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
> Denton Bobeldyk MCNE, CCDA, CCNA, CCSI, CCIE #5509
> Email: denny@kentwoodps.org
> Phone: 616-530-9196
>
> Cisco Certified Internetworking Expert #5509
> (need you read anymore???)
> Master CNE - Connectivity
> Cisco Certified Design Associate
> Cisco Certified Network Associate
> Cisco Certified Systems Instructor
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:52 GMT-3