From: Dave Gahm (gahm@xxxxxxx)
Date: Sun Jan 30 2000 - 17:47:53 GMT-3
Vijay,
ELAN and VLAN names do not need to match:
Step 3 Create the LEC, specifying the VLAN number and the ELAN name to which
to bind the LEC.
lane client ethernet vlan_id elan-name
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_5_3/atm_cfg/a
tm.htm#xtocid1073220
-----Original Message-----
From: Vijaykrishna <vijaykrishna@netzero.net>
To: ccielab@groupstudy.com <ccielab@groupstudy.com>
Date: Sunday, January 30, 2000 10:22 AM
Subject: LANE with VLANs
>Hi all,
>
>As per my understanding ....
>
>- when you are using VLANs with ATM i/f on Cat5500, if you are using PVCs
>then you can assign the pvc to the VLAN with the "atm bind pvc " command.
>
>- when you are using the LANE and defining multiple ELANs and VLANs, the
>only way you can co-relate the two is by having same ELAN and VLAN name so
>by default the ELAN name of the VLAN 1 has to be "default"
>
>Is it correct ?
>any other comment are welcome...
>
>thanks,
>Vijay
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:46 GMT-3