From: naushad prasla (naushad.prasla@xxxxxxxxx)
Date: Sun Jan 23 2000 - 14:12:06 GMT-3
Denton,
Use map-list command to map the destination IP address to an SVC NSAP
address. Just like you would do it on the frame relay network. Just a
different command structure.
Naushad Prasla
Denton Bobeldyk wrote:
> SVCs appear to be the most simple to setup.
> It would seem that all you have to do is:
>
> interface ATM0
> ip addr 172.16.10.1 255.255.255.0
> atm esi-address xxxxxxxxxxxx.xx <--It would appear that I could enter
> either this, or the atm-nsap address
> atm pvc 1 0 5 qsaal <-- This pvc needs to be setup
> atm pvc 2 0 16 ilmi <-- This pvc needs to be setup.
>
> Are you done then?
> What sort of commands can I use to see what other IP addresses area
> available for pinging
> on this ATM cloud?
>
> When would I need to use a map-list for SVCs???
>
> Any help would be greatly appreciated. And of course the sooner the
> better :)
>
> -Denny
>
> --
> -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
> Denton Bobeldyk MCNE, CCDA, CCNA, CCSI
> Email: denny@kentwoodps.org
> Phone: 616-530-9196
>
> Master CNE - Connectivity
> Cisco Certified Design Associate
> Cisco Certified Network Associate
> Cisco Certified Systems Instructor
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:45 GMT-3