From: Earl Aboytes (earl@xxxxxxxxxxxx)
Date: Fri Jan 14 2000 - 00:40:54 GMT-3
Use the log statement at the end of the access list and you will get a
count of packets that are hitting the list. I am not sure if you can get
any more specific with it.
Earl
At 08:59 PM 1/13/00 -0500, Stein, Jared wrote:
>Is there anyway to find out what is trying to get through you access list
>applied on an interface.
>
>Example
>
>access list 101 permit icmp any any
>
>can I see what traffic is failing by port? how could I see if gre was
>failing, ftp etc.
>
>Thanks
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:44 GMT-3