From: jaime.salazar@xxxxxxxxxx
Date: Tue Jan 11 2000 - 15:37:25 GMT-3
You can do an clear ip router * but you have to wait for a while until it come
back.
Brad Hedlund <BHedlund@LifeTimeFitness.com> on 11/01/2000 12:34:58 PM
To: Jaime Salazar/Mexico/AMERICAS/Equant@Equant
cc: "'ccielab@groupstudy.com'" <ccielab@groupstudy.com>
Subject: RE: VLSM ---> FLSM or OSPF --> IGRP
Be careful, if you reload it wont work anymore!
Using Darrel's original scenario, if you 'clear ip ro *' or reload R2 ...
the summary route goes away and doesnt come back.
Try it out, see if you can find a solution.
-Brad
>
> Stan,
>
> You are right, summary-address command must be used in ASBR
> rather than area
> range that is used in ABR. Configure Summary-address in the
> router with ospf and
> igrp, additional to this you must type a static route to
> null0. After you do
> this you will see it working. I just did it on my own lab and
> it works just
> fine.
>
> Jaime
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:44 GMT-3