From: brian.m.edwards@xxxxxxxxx
Date: Tue Jan 11 2000 - 13:35:49 GMT-3
Does this work?
RtrA:
interface bri 0
encap ppp
dialer rotary-group 3
!
interface dialer 3
encap ppp
dialer in-band
snapshot client 5 360 dialer
dialer map snapshot 1 4155556734
RtrB:
interface bri 0
encap ppp
snapshot server 5 dialer
> -----Original Message-----
> From: Mike McSpedon [SMTP:Mike@ccci.com]
> Sent: Thursday, December 23, 1999 10:15 AM
> To: Derek Fage; 'Mike McSpedon'; Chad Marsh; Curtis Phillips
> Cc: ccielab@groupstudy.com
> Subject: RE: Snapshot routing on dialer interfaces?
>
> Thanks for the clarification.
>
> -Mike
>
> At 03:59 PM 12/23/99 -0000, Derek Fage wrote:
> >This example looks like a dialer interface that uses rotary groups. This is
> >Legacy DDR (uses dialer maps).
> >
> >I'm fairly sure Chad is correct in that if you use the newer dialer profiles
> >(dialer pool etc...) you cannot do snapshot routing.
> >
> >Derek...
> >
> >> -----Original Message-----
> >> From: Mike McSpedon [SMTP:Mike@ccci.com]
> >> Sent: 23 December 1999 15:16
> >> To: Chad Marsh; Curtis Phillips
> >> Cc: ccielab@groupstudy.com
> >> Subject: Re: Snapshot routing on dialer interfaces?
> >>
> >> Chad,
> >>
> >> I was able to get it to work just fine last night for IP, IPX, and AT
> >> using
> >> dialer interfaces on the hub router using 2500s and 11.3(5). FWIW, there
> >> is a Tech Tip on CCO at http://www.cisco.com/warp/public/129/21.html that
> >> shows the server configured on a dialer interface. Is there, perhaps, an
> >> IOS bug in one of the code levels that causes Snapshot routing not to work
> >> with logical interfaces?
> >>
> >> Just thought I'd add my .02...
> >>
> >> -Mike
> >>
> >>
> >> At 05:42 PM 12/21/99 -0800, Chad Marsh wrote:
> >> >You can do snapshot routing on dialer interfaces if you use rotory
> >> >groups, it will not work with dialer pools.
> >> >
> >> >Chad Marsh
> >> >CCIE# 5185
> >> >
> >> >Curtis Phillips wrote:
> >> >>
> >> >> Hello,
> >> >>
> >> >> I was curious to find Caslow's example of snapshot routing in his book
> >> >> to reference legacy (physical) interface configuration for snapshot
> >> routing.
> >> >> Is it workable to perform config on Dialer interface instead?
> >> >>
> >> >> I have a had little luck.
> >> >>
> >> >> Please advise and send config if possible..
> >> >>
> >> >> Regards,
> >> >>
> >> >> Curtis
> >> >>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:44 GMT-3