From: Brad Hedlund (BHedlund@xxxxxxxxxxxxxxxxxxx)
Date: Sun Jan 09 2000 - 16:58:13 GMT-3
Also, I forgot to mention ...
If you didnt want to, or couldn't turn off ip routing with 'no ip routing'
(maybe because other interfaces on the router were routing IP to other
networks. You can still get this to work.
You would need to enable IRB (Integrated Routing and Bridging)
'bridge irb'
Then you would need to tell the router not to route IP on interfaces that
are configured for bridging:
'no bridge 1 route ip'
Then tell the router to bridge ip on those interfaces:
'bridge 1 bridge ip'
Hope this helps,
-Brad
>
> Is it possible to create a transparent bridge like this.
>
> I have tried, however it just does not work.
>
> I did the map bridge statements on the frame side
> Ethernets are in bridge group1
> I cannot ping from pca to pcb.
>
> Will this work or did I do something wrong.
>
> Thanks
>
>
> PC-A
> --------RouterA---------Frame-relay----------RouterB---------PC-B
>
> ip x.x.2.1 ip x.x.2.2
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:43 GMT-3