From: Brian Best (bbest@xxxxxxxxxxxxx)
Date: Sun Jan 09 2000 - 15:33:26 GMT-3
Jared,
Not sure how you have your interfaces configured, but remember the behavior
of a bridge when attempting to learn a MAC address. It will broadcast out
all interfaces except where it originated. In a frame configuration this
can be a problem and you will have to force an alternate path using path
cost, spanning tree priority, or both.
Regards,
Brian Best
> -----Original Message-----
> From: Stein, Jared [mailto:jstein@techdata.com]
> Sent: Sunday, January 09, 2000 9:23 AM
> To: 'ccielab@groupstudy.com'
> Subject: Transparent Bridging over frame
>
>
>
>
> Is it possible to create a transparent bridge like this.
>
> I have tried, however it just does not work.
>
> I did the map bridge statements on the frame side
> Ethernets are in bridge group1
> I cannot ping from pca to pcb.
>
> Will this work or did I do something wrong.
>
> Thanks
>
>
> PC-A
> --------RouterA---------Frame-relay----------RouterB---------PC-B
>
> ip x.x.2.1 ip x.x.2.2
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:43 GMT-3