From: Denton Bobeldyk (denny@xxxxxxxxxxxxxx)
Date: Wed Dec 29 1999 - 02:02:00 GMT-3
I'm not sure where it is on the CD, but if it helps here's a little info on it:
When you use the 'priority' parameter for the dlsw remote-peer command
it will establish 4 TCP connections b/t the DLSW peers.
Each of the different TCP connections will carry the 4 different priorities
High - 2065
Medium - 1981
Normal - 1982
Low - 1983
After you establish the priority for your SNA and Netbios traffic you can use
custom/priority queueing to setup the priorities for these TCP ports...
I know that's kind of a brief answer, but I didn't have time to write a small
book
on this :)
If you find it on the CD I'd be curious to take a look at there examples.
Hope this wasn't a waste of your time!
-Denny
Earl Aboytes wrote:
> Isn't that part of custom queuing? I would think that it should be part of
> the interface configuration section.
> Earl Aboytes
>
> At 09:19 PM 12/27/99 -0800, zhencai wrote:
> >Hi,
> >
> >Which part of the documentation cd covers dlsw+ queuing? It's not in the
> >dlsw+ configuration section. Weird...
> >
> >Zhen Cai
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:00 GMT-3