From: Scott Morris (SMorris@xxxxxxxxxxxxx)
Date: Mon Dec 27 1999 - 11:18:27 GMT-3
The last two folks are correct... You are in fact encouraged to reboot your
routers whenever you feel like to verify that things will still work after
reset... Who told you (Yifan/Eric) that you needed approval to do so?
Scott
smorris@tele-tech.com
-----Original Message-----
From: Chuah Eng Wee [mailto:chuahew@cyberway.com.sg]
Sent: Monday, December 27, 1999 9:06 AM
To: Brian R. 'Swannie' Swan; ccielab@groupstudy.com
Subject: Re: ospf authentication
I took the lab twice in Australia, no such thing. U can reboot the router
anytime u like. What Gary said is right.
Eng Wee
At 12:23 AM 12/27/99 -0600, Brian R. 'Swannie' Swan wrote:
>I've only taken the lab once, but I didn't find that to be the case? Can
>anyone
>else add input on this?
>
>Swannie
>
>Yifan/Eric WANG wrote:
>
> > But.. in ccie lab exam, you must give a good reason to proctor if you
want
> > to reboot a router. You can lose points if you reboot a router without a
> > sound reason.
> >
> > >From: Stanislav Sinyagin <SSinyagin@mtu.ru>
> > >Reply-To: Stanislav Sinyagin <SSinyagin@mtu.ru>
> > >To: "Yifan/Eric WANG" <yifanwang@hotmail.com>
> > >CC: MJaouad@SARCOM.COM, ccielab@groupstudy.com
> > >Subject: Re[2]: ospf authentication
> > >Date: Sun, 26 Dec 1999 10:32:13 +0300
> > >
> > >YEW> I changed the int. auth. password from cisco to cisco1. Surely
ospf
> > >session
> > >YEW> went down as expected. But after I changed it back to "cisco", I
> still
> > >got
> > >YEW> auth. mistach in "debug ip ospf event".
> > >
> > >YEW> I had to reboot the routers.
> > >
> > >YEW> Was it a bug with 11.1.24 ip ?
> > >
> > >yeah, there are many small bugs which require you to reboot. Recently
> > >I configured EIGRP on two routers, then added RIP, then removed EIGRP
> > >-- and one of the router's RIP didn't send any updates. After a reboot
> > >all went allright.
> > >
> > >Also it was with BGP confederation -- the router didn't want to send
> > >any updates to EBGP neighbor within confederation, until I rebooted
> > >it.
> > >
> > >So, if the configs seem to be right, and it does not work, reboot it.
> > >
> > >Stan
> > >
> > >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:00 GMT-3