From: anil kandare (akkandare@xxxxxxxxx)
Date: Thu Dec 23 1999 - 13:30:52 GMT-3
Vijay ,
Try these commands
ip nat inside source list 1 interface serial0
access-list 1 permit 10.1.1.1 255.255.255.0
Int serial 0
ip address 137.5.5.5
..Anil
--- Vijay Venkatesh <vijay.venkatesh@usa.net> wrote:
> Awright here is the scoop. I have a router. It has 2
> ethernet
> interfaces. One interface is the outside internet
> let's say with ip
> 137.5.5.5. Let's say I have a web server 10.1.1.1 on
> the other ethernet
> interface. Now please take note 137.5.5.5 is in use
> on the interface
> of the router connected to the internet. I have only
> 1 ip available
> for the internet and that 1 ip is bound to the
> interface. Now, can I
> translate an ip that is already bound to an
> interface ? If so, please
> show me a working config. Thank you.
>
> Regards,
> Vijay.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:00 GMT-3