From: gu bin (gbtiger@xxxxxxxxxxx)
Date: Mon Dec 20 1999 - 22:19:29 GMT-3
Hi
Another solution is running eigrp only in serial interface and runing rtmp
only in tokenring interface, after disable the redistribution, everything
will work fine.
Regards
>From: Stanley Freiman <stanley@tml.co.za>
>Reply-To: Stanley Freiman <stanley@tml.co.za>
>To: jaime.salazar@equant.com
>CC: "Frank K. Lu" <fclu@superlink.net>, Alex Yeung <alex.yeung@lmco.com>,
> ccielab@groupstudy.com
>Subject: Re: Preventing Appletalk network and zone appears in otherrouters
>WITHOUT filters?
>Date: Mon, 20 Dec 1999 23:40:55 +0200
>
>You only have to run one routing protocol rtmp (must be distance vector) on
>the S0
>and E0 interfaces just add the command "no appletalk send-rtmps" these
>interface
>will not send out RTMP update but will listen to incomming RTMP messages,
>the same
>as "passive interface" in "router rip"
>
>Stanley
>
>jaime.salazar@equant.com wrote:
>
> > Frank
> >
> > I have made what you suggested for this scenario but I can still see the
>routes
> >
> > I set up
> >
> > app routin eigrp
> > no app route-redistribution
> >
> > int to0
> > app ca 45-45 45.1
> > app zone to0
> > app prot eigrp
> > no app rtmp
> >
> > int s0
> > app ca 600-600 600.1
> > app zone D
> >
> > Serial 0 is still propagating the token ring route.
> >
> > What is missing?
> >
> > Jaime Salazar
> > CCDP, CCNP Voice Access
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:59 GMT-3