Re: Preventing Appletalk network and zone appears in other routers WITHOUT filters?

From: Frank K. Lu (fclu@xxxxxxxxxxxxx)
Date: Mon Dec 20 1999 - 00:14:56 GMT-3

• Next message: Bill Carter: "Y2K Advisor site"
• Previous message: Naushad Prasla: "RE: Appletalk eigrp route filtering"
• Maybe in reply to: Alex Yeung: "Preventing Appletalk network and zone appears in other routers WITHOUT filters?"
• Next in thread: jaime.salazar@xxxxxxxxxx: "Re: Preventing Appletalk network and zone appears in other routers WITHOUT filters?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
How about use two different routing protocol on each interface and disable the
redistribution...

Frank

Alex Yeung wrote:

> I have three routers r1, r2 and r3.
>
> r1 has one serial, one token ring and one ethernet interfaces
>
> r2 has one ethernet and one serial interfaces
>
> r3 has one serial, one token ring and one ethernet interfaces
>
> r1 and r2 area connected to the same ethernet segment
>
> r2 is connected to r3 via serial link
>
> r1 is not connected to r3
>
> How do I configure the Appletalk network so that r3 can see ALL the
> Appletalk
>
> networks and zones except r1's token-ring Appletalk network & zone WITHOUT
> ANY FILTERS? NO FILTERS can be used. Can someone give me an example w/
> configs?
>
> Thanks.
>
> Alex Yeung, CCNP, MCSE
> Network Engineer
>

• Next message: Bill Carter: "Y2K Advisor site"
• Previous message: Naushad Prasla: "RE: Appletalk eigrp route filtering"
• Maybe in reply to: Alex Yeung: "Preventing Appletalk network and zone appears in other routers WITHOUT filters?"
• Next in thread: jaime.salazar@xxxxxxxxxx: "Re: Preventing Appletalk network and zone appears in other routers WITHOUT filters?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:59 GMT-3