From: Mosley, Arthur (Arthur.Mosley@xxxxxxxx)
Date: Mon Dec 13 1999 - 19:55:27 GMT-3
-----Original Message-----
From: Mosley, Arthur [mailto:Arthur.Mosley@wang.com]
Sent: Monday, December 13, 1999 9:43 AM
To: 'DERY, FREDERIC'
Cc: 'ccielab@groupstudy.com '
Subject: RE: AUX0 and Async line configuration
This seems to work but I cannot add an access list with out the dialer
in-band command. But, I can't get it to work with the dialer in-band
command configured. I can't get it to work they way Cisco has it
configured.
Thanks,
art
!
interface Async1
ip address 192.168.10.1 255.255.255.0
encapsulation ppp
async dynamic routing
async mode dedicated
ipx network 700
dialer-group 1
no cdp enable
!
ip route 0.0.0.0 0.0.0.0 Async1
!
snmp-server community public RO
dialer-list 1 protocol ip permit
dialer-list 1 protocol novell permit
!
line con 0
exec-timeout 0 0
line aux 0
modem InOut
transport input all
rxspeed 38400
txspeed 38400
flowcontrol hardware
line vty 0 4
exec-timeout 0 0
password bar
login
!
end-----Original Message-----
From: DERY, FREDERIC [mailto:frederic.dery@connexim.ca]
Sent: Friday, December 10, 1999 5:14 PM
To: Mosley, Arthur
Cc: 'ccielab@groupstudy.com '
Subject: Re: AUX0 and Async line configuration
Check :
http://www.cisco.com/warp/public/793/access_dial/auxback.html
Hope this help
Frederic Dery
"Mosley, Arthur" wrote:
>
> I have lab scenario that requires the configuration of OSPF in area2 that
> comprises two router connected on side by AUX0 and the other side by
Asynch
> 5. How would I configure the line between the two routers(reverse
> telnet,PPP?)? Or is there a source for this type of scenario. Also, are
> there any OSPF related issues?
>
> Thanks,
>
> Art
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:59 GMT-3