From: Scott F. Robohn (sfr@xxxxxxxx)
Date: Tue Dec 07 1999 - 17:57:10 GMT-3
Hmmmm. It is possible that I am mis-informed (read:
WRONG). Could you send the configs for each router?
TIA,
Scott
Brad Hedlund wrote:
>
> >
> > BTW, Inverse ARP only works for IP.
> >
>
> Scott, I am running 11.2 code and Inverse ARP seems to work for non-IP
> protocols for me...
>
> Notice below that the decnet address was dynamically resloved:
>
> R5#sh frame map
> Serial0.1 (up): decnet 1.6 dlci 506(0x1FA,0x7CA0), dynamic,
> broadcast,, status defined, active
> Serial0.1 (up): ip 172.168.100.3 dlci 503(0x1F7,0x7C70), dynamic,
> broadcast,, status defined, active
> Serial0.1 (up): ip 172.168.100.6 dlci 506(0x1FA,0x7CA0), dynamic,
> broadcast,, status defined, active
> Serial0.2 (up): point-to-point dlci, dlci 504(0x1F8,0x7C80), broadcast
> status defined, active
> R5#
> R5#
>
> -Brad
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:59 GMT-3