From: George Spahl (georges@xxxxxxxxx)
Date: Mon Dec 06 1999 - 22:30:54 GMT-3
Scott,
You don't by any chance have a password or login configured on that console
port do you? Just a thought!
George
At 09:22 AM 12/6/99 -0500, Scott Morris wrote:
>Haven't a clue. :) That was why I originally guessed 2000. however, the
>router I'm doing this from is a 4500, so there are no line ports anyway.
>I'll try it on a 2509 later and see what happens.
>
>Scott Morris, MCSE, CNE(3.x), CCDP, CCIE #4713, Security Specialization
>smorris@tele-tech.com
>
>
>-----Original Message-----
>From: Brett Summerville [mailto:phreeze@erols.com]
>Sent: Monday, December 06, 1999 9:01 AM
>To: Manjeet Chawla; Scott Morris
>Cc: ccielab@groupstudy.com
>Subject: Re: Reverse Telnet from an AUX port...
>
>
>What if you already have port 2001 used on your other reverse telnets?
>
>-----Original Message-----
>From: Manjeet Chawla <mchawla@asanet.com>
>To: Scott Morris <SMorris@tele-tech.com>
>Cc: ccielab@groupstudy.com <ccielab@groupstudy.com>
>Date: Sunday, December 05, 1999 10:27 PM
>Subject: Re: Reverse Telnet from an AUX port...
>
>
>>I just set it up in my lab just to make sure. I used Cisco's black rollover
>>cable to connect my aux port to the console of the other router.
>>
>>Here a working config.
>>
>>!
>>version 11.3
>>service timestamps debug uptime
>>service timestamps log uptime
>>no service password-encryption
>>!
>>hostname R1
>>!
>>ip host rtr 2001 1.1.1.1
>>!
>>interface Loopback100
>> ip address 1.1.1.1 255.255.255.0
>>!!
>>line con 0
>> exec-timeout 0 0
>>line aux 0
>> no exec
>> transport input all
>>line vty 0 4
>> login
>>!
>>end
>>
>>R1#
>>R1#rtr
>>Trying rtr (1.1.1.1, 2001)... Open
>>
>>R2(config-router)#
>>R2(config-router)#
>>R2(config-router)#
>>R2(config-router)#
>>R2(config-router)#
>>R2(config-router)# <<<<<<CTRL ^ >>>>>
>>R1# <<<<<<<Enter inputted >>>>>
>>[Resuming connection 1 to rtr ... ]
>>
>>R2(config-router)#
>>R2(config-router)#
>>
>>Good luck
>>-Manjeet
>>
>>
>>
>>
>>
>>
>>Scott Morris wrote:
>>
>>> Ok. Did that part, and the requisite 'transport input all' and 'no exec'
>>> and set up the ip host and all that jazz... now it keeps telling me
>>> connection refused. I know that normally on a 2509/2511, things get
>>> squirrely sometimes, and you just do a clear line # to fix it. Well,
>doing
>>> 'clear line aux 0' says that it clears the line, but I continue to get
>>> connection refused messages. It's not nice. :)
>>>
>>> Scott
>>>
>>> -----Original Message-----
>>> From: Dave Oakman [mailto:doakman@home.com]
>>> Sent: Sunday, December 05, 1999 6:25 PM
>>> To: 'Scott Morris'; ccielab@groupstudy.com
>>> Subject: RE: Reverse Telnet from an AUX port...
>>>
>>> Scott,
>>> Do a show line and see what line the aux port is. Add 2000 and
>there
>>> is
>>> your reverse telnet port #
>>>
>>> ttfn
>>> DaveO
>>>
>>> -----Original Message-----
>>> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>>> Scott Morris
>>> Sent: Sunday, December 05, 1999 5:53 PM
>>> To: 'ccielab@groupstudy.com'
>>> Subject: Reverse Telnet from an AUX port...
>>>
>>> Has anybody per chance set up reverse telnet from an aux port of a
>router?
>>> I'm well aware of how to do it from line ports of a 2509/2511... But I'm
>>> looking to go from the aux port of one unit to the console of another
>unit,
>>> and don't know what port number to use. Anyone done this before?
>Thanks.
>>>
>>> Scott Morris, MCSE, CNE (3.x), CCDP, CCIE #4713, Security Specialization
>>> (CCIE)
>>> smorris@tele-tech.com
>>>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:58 GMT-3