From: Scott Morris (SMorris@xxxxxxxxxxxxx)
Date: Mon Dec 06 1999 - 09:44:19 GMT-3
Did it quite a few times, but actually had it pointed out to me that aux is
port 2001, not 2000. *shrug*
Scott Morris, MCSE, CNE(3.x), CCDP, CCIE #4713, Security Specialization
smorris@tele-tech.com
-----Original Message-----
From: Vaughan Lee [mailto:vaughan.lee@debis.co.uk]
Sent: Monday, December 06, 1999 7:35 AM
To: ccielab@groupstudy.com
Subject: RE: Reverse Telnet from an AUX port...
Experience has shown that the 'clear line aux 0' may need doing a couple of
times. I've normally got it working on the second or third attempt, rarely
on the first.
Vaughan Lee, Network Specialist.
CCIE #5250
debis IT Services (UK) Ltd.
E-mail: vaughan.lee@debis.co.uk
Direct Phone: 01908 279561
Direct Fax: 01908 279061
http://www.debis.co.uk/
-----Original Message-----
From: Dave Humphrey [mailto:dave.humphrey@virgin.net]
Sent: 06 December 1999 09:34
To: Scott Morris; doakman@home.com; ccielab@groupstudy.com
Subject: Re: Reverse Telnet from an AUX port...
Have you run out of VTY sessions?
Dave
----- Original Message -----
From: Scott Morris <SMorris@tele-tech.com>
To: <doakman@home.com>; <ccielab@groupstudy.com>
Sent: Monday, December 06, 1999 2:36 AM
Subject: RE: Reverse Telnet from an AUX port...
> Ok. Did that part, and the requisite 'transport input all' and 'no exec'
> and set up the ip host and all that jazz... now it keeps telling me
> connection refused. I know that normally on a 2509/2511, things get
> squirrely sometimes, and you just do a clear line # to fix it. Well,
doing
> 'clear line aux 0' says that it clears the line, but I continue to get
> connection refused messages. It's not nice. :)
>
> Scott
>
> -----Original Message-----
> From: Dave Oakman [mailto:doakman@home.com]
> Sent: Sunday, December 05, 1999 6:25 PM
> To: 'Scott Morris'; ccielab@groupstudy.com
> Subject: RE: Reverse Telnet from an AUX port...
>
>
> Scott,
> Do a show line and see what line the aux port is. Add 2000 and there
> is
> your reverse telnet port #
>
> ttfn
> DaveO
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Scott Morris
> Sent: Sunday, December 05, 1999 5:53 PM
> To: 'ccielab@groupstudy.com'
> Subject: Reverse Telnet from an AUX port...
>
>
> Has anybody per chance set up reverse telnet from an aux port of a router?
> I'm well aware of how to do it from line ports of a 2509/2511... But I'm
> looking to go from the aux port of one unit to the console of another
unit,
> and don't know what port number to use. Anyone done this before?
Thanks.
>
> Scott Morris, MCSE, CNE (3.x), CCDP, CCIE #4713, Security Specialization
> (CCIE)
> smorris@tele-tech.com
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:58 GMT-3