From: Stephens, Paul [Prof.Serv] (Paul.Andrew.Stephens@xxxxxxxxxx)
Date: Fri Dec 03 1999 - 05:45:15 GMT-3
I've been doing my practice on a lab running 12.0 and the no frame-relay
inverse-arp works fine. What version of code are you using Martin ?
BTW I'm sitting my lab on Monday in Belgium, any tips within the NDA ?
Cheers
Paul Stephens
UK INI Network Consultant
Networks and Systems Integration Services
Compaq Computer Ltd
*mailto:paul.andrew.stephens@compaq.com
<mailto:paul.andrew.stephens@compaq.com>
* Mobile +44 7818 457948
-----Original Message-----
From: Stanislav Sinyagin [mailto:SSinyagin@mtu.ru]
Sent: Friday, December 03, 1999 7:16
To: Martin Bander; Stephens, Paul [Prof.Serv];
ccielab@groupstudy.com
Subject: Re: Frame Relay
> I only want to use the PVC's as shown above. I use map statements
for R3 to
> R5 and R4 to R5. I do not want to use the PVC between R4 and R3.
no
> fram-relay inver-arp should resolve this problem. It does not.
I am sure it does -- 'cause that's exactly what was on my CCIE lab
(which I failed)
and no fr inverse-arp worked this out. And "clear fr inv" cleared
the inverse arp cashe,
not the lines from the running config. This was ios 11.2
Stan
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:58 GMT-3