From: Scott Morris (SMorris@xxxxxxxxxxxxx)
Date: Sun Nov 07 1999 - 15:53:08 GMT-3
Ok. Apparantly you're at that "stressing out" point... Simple. Remember,
simple. Do not overthink things....
There aren't that many possible settings for console port speeds anyway...
Change your terminal program until you find the one that works. ;)
Remember, just because you're going to be a CCIE does not mean that
everything in life is difficult or complex. Always remember the simple
solutions.
Enjoy, and good luck!!!
Scott Morris, MCSE, CNE (3.x), CCDP, CCIE #4713, Security
Specialization(CCIE)
smorris@tele-tech.com
-----Original Message-----
From: Brian Van Benschoten [mailto:vader@inxpress.net]
Sent: Sunday, November 07, 1999 1:06 PM
To: ccielab@groupstudy.com
Subject: Recover from console port speed change
Anyone know how to recover from a changed console port speed?
Its one of the config registers, I can't seem to find a complete listing of
config-registers on CCO. I can find the bits needed to recover passwords
and boot ROM. Just not the console speed.
Thanks.
3 days.....
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:55 GMT-3