From: Brian Van Benschoten (vader@xxxxxxxxxxxx)
Date: Mon Nov 01 1999 - 23:05:40 GMT-3
Are there certain address combinations that wont work when changing the NSAP
or ESI address
I'm doing some testing with SVCs
Here is what I have:
LS1010
!
atm address 66.1234.0000.0000.0000.0000.0000.6666.6666.6666.00
atm router pnni
no aesa embedded-number left-justified
node 1 level 56 lowest
redistribute atm-static
-----------------Router 1 -----------------
interface ATM0/0
ip address 192.168.50.1 255.255.255.0
no ip directed-broadcast
map-group brian
atm nsap-address 66.123400000000000000000000.131313131313.00
atm pvc 1 0 5 qsaal
atm pvc 2 0 16 ilmi
no atm ilmi-keepalive
map-list brian
ip 192.168.50.2 atm-nsap 66.123400000000000000000000.141414141414.00
----------------Router 2 -------------
interface ATM0/0
ip address 192.168.50.2 255.255.255.0
no ip directed-broadcast
atm nsap-address 66.123400000000000000000000.141414141414.00
atm pvc 1 0 5 qsaal
atm pvc 2 0 16 ilmi
no atm ilmi-keepalive
!
svc r13 nsap 66.123400000000000000000000.131313131313.00
protocol ip 192.168.50.1 broadcast
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:55 GMT-3