From: Bill Wade (wwade@xxxxxxxxx)
Date: Thu Oct 21 1999 - 07:59:10 GMT-3
Take a look at "Bridging and IBM Networking Configuration Guide"
on the Cisco Documentation CD.
Bill
At 10:24 PM 10/20/99 , Jinho Hong wrote:
>Thanks Fred
>
>Another question,
>
>Could you tell me the irb with sample ?
>
>Regards,
>Jinho Hong
>-----Original Message-----
>·ol : Fred Ingham <fningham@worldnet.att.net>
>¶æ : Jinho Hong <sthong@ascend.co.jp>
>CC : ccielab@groupstudy.com <ccielab@groupstudy.com>
>ú : 1999N1021ú 11:17
>¼ : Re: Transparent Bridge question
>
>
>>Enable bridging on the R1-R2 and R1-R3 links, configure the spanning
>>tree such that R1-R2 is the forwarding path and R1-R3 is
>>blocking. If the R1-R2 link goes down, the R1-R3 link will transition
>>to forwarding.
>>
>>Use the show bridge and show span commands to check the configuration.
>>
>>Jinho Hong wrote:
>>>
>>> Hi, Guy
>>>
>>> Could you tell me the below question ?
>>>
>>> (( Transparent Bridge question ))
>>>
>>> R1 router connected to frame-relay interface to R2 and R3.
>>> R2 and R3 connected R1 and they connected same ethernet segment.
>>>
>>> R1 <- Hub
>>>
>>> FR
>>>
>>> R2 R3 <- Spoke
>>> | |
>>> ----------------
>>> VLAN
>>>
>>> I want to make that if R1-R2 line is down, automatically R1-R3 use it.
>>>
>>> Regards,
>>> Jinho Hong
>>>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:53 GMT-3