From: Richardson, Cheryl (cheryl.richardson@xxxxxxxx)
Date: Wed Sep 29 1999 - 12:29:28 GMT-3
Todd, Did you try configuring the serial interfaces with IPXWAN? I have
never seen NLSP WAN interfaces have an ipx network number assigned..
Cheryl Richardson
> -----Original Message-----
> From: Todd M. Sahba [SMTP:sahba@excite.com]
> Sent: Wednesday, September 29, 1999 9:51 AM
> To: ccielab@groupstudy.com
> Subject: NLSP adjacency problem
>
> I've run into problems getting NLSP neighbors to see each other. I'm
> hoping
> someone can give me some insight into this problem.
>
>
> Here's the setup:
>
> [r1] serial0/0 ----------- HDLC --------serial0/0 [r3]
>
> I've enabled nlsp, set the area-address to 0 0, enabled nlsp on the
> interfaces and disabled rip and sap. (configs are below).
>
> No adjacency is being formed, and when I "debug ipx nlsp adj" on r1 I
> don't
> see any receives:
>
> 21:45:07: NLSP-Adj: Sending serial IIH on Serial0/0
> 21:45:15: NLSP-Adj: Sending serial IIH on Serial0/0
> 21:45:24: NLSP-Adj: Sending serial IIH on Serial0/0
> 21:45:34: NLSP-Adj: Sending serial IIH on Serial0/0
>
> On r3 I see both sends and receives:
>
> 21:46:39: NLSP-Adj: Sending serial IIH on Serial0/0
> 21:46:41: NLSP-Adj: Rec serial IIH from *HDLC* (Serial0/0), cir type L1,
> cir
> id
> 04
> 21:46:41: NLSP-Adj: old state INIT, new state INIT
> 21:46:49: NLSP-Adj: Sending serial IIH on Serial0/0
> 21:46:51: NLSP-Adj: Rec serial IIH from *HDLC* (Serial0/0), cir type L1,
> cir
> id
> 04
> 21:46:51: NLSP-Adj: old state INIT, new state INIT
>
> On r1, when I "debug ipx packet" I see a bad packet coming from r3:
>
> 21:54:19: IPX: Se0/0:3000.0000.0000.0001->0.ffff.ffff.ffff ln= 66 tc=00
> pt=00 ds
> =9001 ss=9001, rcvd
> 21:54:19: IPX: Se0/0:3000.0000.0000.0001->0.ffff.ffff.ffff ln= 66 tc=00
> pt=00 ds
> =9001 ss=9001, bad pkt
>
> Here are my configurations:
>
> r1#sh run
> Building configuration...
>
> Current configuration:
> !
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname r1
> !
> !
> no ip subnet-zero
> no ip domain-lookup
> ipx routing 0000.0000.0001
> ipx internal-network 1000
> !
> !
> !
> interface Loopback0
> ip address 140.10.11.1 255.255.255.0
> no ip directed-broadcast
> ipx network 11
> !
> interface Ethernet0/0
> mac-address 0000.0000.0001
> ip address 140.10.10.1 255.255.255.0
> no ip directed-broadcast
> ipx network 10
> !
> interface Serial0/0
> ip address 140.100.13.1 255.255.255.0
> no ip directed-broadcast
> no ip mroute-cache
> ipx network 13
> ipx nlsp enable
> ipx nlsp rip off
> ipx nlsp sap off
> clockrate 64000
> !
> interface Serial0/1
> no ip address
> no ip directed-broadcast
> !
> router igrp 15
> network 140.100.0.0
> !
> ip classless
> !
> !
> !
> ipx router nlsp
> area-address 0 0
> !
> !
> !
> !
> line con 0
> exec-timeout 0 0
> transport input none
> line aux 0
> line vty 0 4
> login
> !
> no scheduler allocate
> end
>
> r1#
> r3#sh run
> Building configuration...
>
> Current configuration:
> !
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname r3
> !
> !
> ip subnet-zero
> no ip domain-lookup
> !
> ipx routing 0000.0000.0003
> ipx internal-network 3000
> !
> !
> !
> !
> interface FastEthernet0/0
> ip address 140.100.235.3 255.255.255.192
> no ip directed-broadcast
> ip ospf priority 0
> ipx network 235
> !
> interface Serial0/0
> ip address 140.100.13.3 255.255.255.0
> no ip directed-broadcast
> no ip mroute-cache
> ipx network 13
> ipx nlsp enable
> ipx nlsp rip off
> ipx nlsp sap off
> !
> interface Serial0/1
> ip address 140.100.35.3 255.255.255.0
> no ip directed-broadcast
> ipx network 35
> clockrate 128000
> !
> !
> router ospf 1
> redistribute igrp 15 metric 10 subnets
> network 140.100.35.3 0.0.0.0 area 0
> network 140.100.235.3 0.0.0.0 area 0
> !
> router igrp 15
> redistribute ospf 1 metric 10 100 255 10 100
> passive-interface FastEthernet0/0
> passive-interface Serial0/1
> network 140.100.0.0
> !
> ip classless
> ip default-network 150.100.0.0
> no ip http server
> !
> !
> !
> !
> ipx router nlsp
> area-address 0 0
> !
> !
> !
> !
> line con 0
> exec-timeout 0 0
> transport input none
> line aux 0
> line vty 0 4
> login
> !
> end
>
> r3#
>
>
>
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:51 GMT-3