From: Chuah Eng Wee (chuahew@xxxxxxxxxxxxxxx)
Date: Wed Sep 22 1999 - 11:53:32 GMT-3
Yup, the neigh X.X.X.X priority command will not work as expected. Use the
ip ospf priority command. I have tried this out several times, it just
couldn't work.
Eng Wee
At 08:09 AM 9/21/99 -0400, Denton Bobeldyk wrote:
>I actually ran into a similar problem in regards to Q2.
>I found that by setting the priority on the interface seemed to take care
>of the problem. Use:
>'ip ospf priority x'
>in interface config mode.
>
>-Denny
>
>alfred zhang wrote:
>
>> Hi,
>>
>> I have some problems about ospf configuration ?
>>
>> Q1:How to change the P-bit of NSSA ABR ?I want that type 7 LSA will
>> not be translated into type 5 LSA and not be flood it throughout the
>> other area.
>> Q2:How to change neighbor priorityin NBMA networkwith the command
>> "neighbor *** priority ***"?At first,I configure the command "neighbor
>> *** priority 10".When I use the command "show ip ospf nei",I find that
>> the neighbor priority change into 1.Why?
>>
>> My ios ver is 11.3 enterprise plus 40.
>> Any help appreciated.
>>
>> Thanks
>> alfred zhang
>>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:51 GMT-3