From: Denton Bobeldyk (denny@xxxxxxxxxxxxxx)
Date: Tue Sep 14 1999 - 10:34:44 GMT-3
In answer to your first question I believe you can
do 'ip ospf network broadcast' which will allow r1 and r3
to come into a neighbor state with each other and therefore
start exchanging routing information.
Not sure about your second question.
-Denny
alfred zhang wrote:
> Hi,
>
> I use three routers to simulate x25 network.
> 132.148.160.5/30
> 132.148.160.6/30
> 25224(x25 address) 25225
> [r1]------------------------[r2]------------------------[r3]
> R2 is the x25 switch simulation.There are no pvcs.
>
> Q:How to configure ospf over this network?R1 and R3 run ospf process.
>
> Q:Can I use the command "ip ospf demand-circuit" in this network?
>
> Thanks a lot.
>
> alfred zhang
> 99/9/14
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:50 GMT-3