From: Fred Ingham (fningham@xxxxxxxxxxxxxxxx)
Date: Fri Sep 03 1999 - 15:01:50 GMT-3
The only command I know that will do this is "no ipx split-horizon eigrp
automonous-system-number". This requires that you ar using eigrp for
ipx, not rip.
Victor Kasacavage wrote:
>
> If I understand it properly, you do not want split horizon on the hub router
> so disable it, or keep it disabled. You will want split horizon on the
> spoke routers. It is not impossible to disable ipx split horizon. Try the
> command no ipx split-horizon
>
> Victor
> ----- Original Message -----
> From: Jason Aarons <jaarons@hotmail.com>
> To: <ccielab@groupstudy.com>
> Sent: Thursday, September 02, 1999 8:07 PM
> Subject: IPX Split Horizon workaround
>
> > I have a frame-relay spoke and hub using Physical interfaces with IPX RIP.
> >
> > In my Hub I need to enable Split Horizon so the spokes know how to reach
> > each other.
> >
> > From what I have read (Caslow) it is impossible to disable IPX Split
> > Horizon.
> >
> > I can either convert to point-to-point interfaces (too easy) and my
> proctor
> > tells me I have I can't do that...
> >
> > So I add "frame-relay map ipx n.n.h.h dlci" and then add static IPX
> routes.
> >
> > Will that work ?
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:50 GMT-3