From: Peter Van Oene (vantech@xxxxxxxxxxxx)
Date: Fri Aug 20 1999 - 00:38:21 GMT-3
All routers in the area need to have the same MD5 password and
be enabled with OSPF authentication as well. I'm sure you know this, but it
tripped me up.
Peter Van Oene
Senior Systems Engineer
UNIS LUMIN Inc.
www.unislumin.com
----- Original Message -----
From: Rahmlow, Howard F. <howard.rahmlow@unisys.com>
To: 'Jason Aarons' <jaarons@hotmail.com>
Cc: <ccielab@groupstudy.com>
Sent: Thursday, August 19, 1999 3:41 PM
Subject: RE: OSPF: Redistribute connected
> Not 100% sure, but you might want to add ip ospf mess 1 md5 cisco to the
> loopbacks. I have seen the same glitch on some versions of the IOS. Some
> want the command, others not.
>
> Howard.
>
>
> -----Original Message-----
> From: Jason Aarons [mailto:jaarons@hotmail.com]
> Sent: Thursday, August 19, 1999 5:59 PM
> To:
> Subject: OSPF: Redistribute connected
>
>
> Other routers can not R3's loopback1,2. Am I missing something under
router
>
> ospf 120 ? Do I need network statement, I thought the redistribute
> connected was enough -jason
>
>
>
> R3#show run
> !
> hostname R3
> !
> ip subnet-zero
> no ip domain-lookup
> !
> interface Loopback0
> ip address 172.16.254.3 255.255.255.255
> !
> interface Loopback1
> ip address 192.168.1.1 255.255.255.224
> !
> interface Loopback2
> ip address 192.168.1.33 255.255.255.224
> !
> interface Serial0
> ip address 10.10.0.2 255.255.255.252
> encapsulation frame-relay
> ip ospf message-digest-key 1 md5 cisco2
> ip ospf network point-to-multipoint
> ip ospf hello-interval 10
> no fair-queue
> !
> interface Serial1
> no ip address
> shutdown
> !
> interface BRI0
> no ip address
> shutdown
> !
> router ospf 120
> redistribute connected
> network 172.16.254.3 0.0.0.0 area 0
> network 10.10.0.0 0.0.0.3 area 0
> area 0 authentication message-digest
> !
> ip classless
> END
>
>
>
> R3#show ip route
> Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
> D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
> N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
> E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
> i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS l-2, * - candidate
default
> U - per-user static route, o - ODR
>
> Gateway of last resort is not set
>
> 10.0.0.0/30 is subnetted, 3 subnets
> C 10.10.0.0 is directly connected, Serial0
> O 10.10.0.4 [110/128] via 10.10.0.1, 00:00:23, Serial0
> O 10.20.0.0 [110/128] via 10.10.0.1, 00:00:23, Serial0
> 192.168.1.0/27 is subnetted, 2 subnets
> C 192.168.1.32 is directly connected, Loopback2
> C 192.168.1.0 is directly connected, Loopback1
> 172.16.0.0/32 is subnetted, 4 subnets
> O 172.16.254.2 [110/129] via 10.10.0.1, 00:00:23, Serial0
> C 172.16.254.3 is directly connected, Loopback0
> O 172.16.254.1 [110/65] via 10.10.0.1, 00:00:23, Serial0
> O 172.16.254.5 [110/129] via 10.10.0.1, 00:00:23, Serial0
> R3#
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:47 GMT-3