From: Jason Aarons (jaarons@xxxxxxxxxxx)
Date: Wed Aug 18 1999 - 21:44:59 GMT-3
I'm looking it up now, but does anyone have any LSAP filter samples (heck
what does LSAP stand for..<grin>). A quick search on CCO yeilds nothing, to
the manuals I go..
jason
----Original Message Follows----
From: Bill Carter <bcarter@family-net.net>
To: Jason Aarons <jaarons@hotmail.com>
I went to the documentation and used the configuration examples. I then
built a
similar scenario. I'm not expecting any SDLC or FDDI. That leaves DLSW
Token-Ring to Ethernet and Peer groups.
(DLSW Examples)
http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/113ed_cr/ibm_
c/bcprt2/bcdlsw.htm#xtocid426230
Don't forget LSAP filtering!!! You will see that!! Learn it, and know how
to
find the LSAP addresses on a search.
Small Hint. the IOS in the LAB is 11.2 Use the documentation for 11.3.
Some
configurations (in general) we not clearly/fully documented until 11.3 A
buddy
failed because the Documentation in 11.2 for something he was doing was not
complete. The answer was in 11.3.
Jason Aarons wrote:
> I wish someone wrote a DLSW/DLSW+ book and would fill it full of
> scenarios/labs. This is clearly something I see less and less of
everyday
> (hey Token Ring and Source Route Bridging aren't the mainstay) and
something
> I need to understand better for the LAB.
>
> Do you have or know of a good reference for studying DLSW ? Caslow
doesn't
> seem to explain/provide labs on DLSW enough. I have yet to see a book
that
> talks/labs DLSW and caveats, how to, etc.
>
> Jason
>
> Please no IBM/Token Ring flames, just a good DLSW resource I can go
read...
>
> I want a DLSW lab/scenario that will make me cry...
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:47 GMT-3