From: Antonio Sabella (Antonio.Sabella@xxxxxxxxxxx)
Date: Tue Aug 10 1999 - 12:35:19 GMT-3
Try a wildcard mask of 0.0.0.3
Antonio
---------------------- Forwarded by Antonio Sabella/USC/AXE on 08/10/99 10:36
AM ---------------------------
nobody@groupstudy.com on 08/10/99 10:05:23 AM
To: jaarons@hotmail.com@internet@WTAXE,
ccielab@groupstudy.com@internet@WTAXE
cc:
Subject: Re: OSPF network; inverse mask question....
Your wild card mask is not including s0..
----Original Message Follows----
From: "Jason Aarons" <jaarons@hotmail.com>
Reply-To: "Jason Aarons" <jaarons@hotmail.com>
To: ccielab@groupstudy.com
Subject: OSPF network; inverse mask question....
Date: Wed, 04 Aug 1999 18:14:37 EDT
interface Serial0
ip address 172.16.254.1 255.255.255.252
encapsulation frame-relay
ip ospf network point-to-point
!
router ospf 1999
network 172.16.254.0 0.0.0.252 area 0
!
ip classless
ip subnet-zero
1#show ip ospf int s0
Serial0 is up, line protocol is up
OSPF not enabled on this interface
if I change the router ospf 1999, network 172.16.254.0 0.0.0.255 it works.
What am I not seeing ?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:46 GMT-3