From: Jason Aarons (jaarons@xxxxxxxxxxx)
Date: Mon Aug 09 1999 - 09:05:08 GMT-3
You should verify everything is working via ip first. Try debug ip packet,
show fr map, show fr pvc, show ip ospf neighbor, debug ip ospf adja, debug
ip ospf flood, debug frame packet, have you reloaded the routers (bugs)?
Make IP work first...
----Original Message Follows----
From: Chuah Eng Wee <chuahew@cyberway.com.sg>
Hi..
Have some problems with this appletalk in frame relay environment :
basically 3 router is hub and spoke topology. Hub router use
multipoint subinterface, spoke router use physical interface.
The spoke router cannot ping the other spoke router and its own interface
despite having the config below
interface Serial0
ip address 137.20.1.3 255.255.255.0
encapsulation frame-relay
ip ospf network broadcast
ip ospf priority 0
appletalk cable-range 1002-1002 1002.221
appletalk zone r1r3r5serial
appletalk protocol eigrp
no appletalk protocol rtmp
frame-relay map appletalk 1002.221 301 broadcast (map to itself)
frame-relay map appletalk 1002.103 301 broadcast (map to another spoke)
frame-relay map appletalk 1002.243 301 broadcast (map to hub)
frame-relay map ip 137.20.1.3 301 broadcast
frame-relay map ip 137.20.1.5 301 broadcast
frame-relay map ip 137.20.1.1 301 broadcast
Debug apple packet doesn't shows any encap failure.
Did i miss out anything ??
Thanks
ENg Wee
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:46 GMT-3