From: Echo Chan (echo.chan@xxxxxxxxx)
Date: Mon Aug 02 1999 - 22:21:47 GMT-3
Hi,
In Hong Kong, ISPs use IRB to connect to Hong Kong Internet Exchange by ATM:
I have some experience in configuring IRB. See the example below:
interface ATM1/0/0
description your PA-A3
no ip address
atm pvc 111 vpi# vci# aal5snap pcr scr mbs
no atm address-registration
map-group HKIX
bridge-group 1
bridge-group 1 spanning-disabled
.....
!
interface BVI1
mac-address your_MAC
mtu 1500
ip address 202.40.161.X 255.255.255.0
ip broadcast-address 202.40.161.255
.....
!
bridge irb
bridge 1 protocol ieee
bridge 1 route ip
no bridge 1 bridge apollo
no bridge 1 bridge appletalk
no bridge 1 bridge clns
no bridge 1 bridge decnet
no bridge 1 bridge ipx
no bridge 1 bridge vines
no bridge 1 bridge xns
!
map-list HKIX
bridge atm-vc 111 broadcast
!
router bgp your_AS
neighbor 202.40.161.1 remote-as 4635
network ......
Best Regards,
Chan Wai Sun
Network Consulting Engineer
UUNET HK
-----Original Message-----
From: bscorzel@us.ibm.com [mailto:bscorzel@us.ibm.com]
Sent: Tuesday, August 03, 1999 3:06 AM
To: ccielab@groupstudy.com
Subject: IRB testing
Has anyone been successful with configuring IRB (Integrated routing /
Bridging).
Does any one have example configurations with the BVI interface, that they
are
willing to share.
Thxs.
Brent D. Scorzelli
Senior-I/T Specialist-Network Integrator
IBM Global Services - Network Services
1630 Long Pond Road, Rochester NY 14626
716.723.4964 Tie 451.4964 Fax 716.723.4933
LotusNotes ibmusm11(bscorzel)
bscorzel@us.ibm.com
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:46 GMT-3