From: Richardson, Cheryl (cheryl.richardson@xxxxxxxx)
Date: Wed Jul 28 1999 - 12:49:16 GMT-3
> Has anyone attempted Scenario One: SMDS Configuration in the Caslow's BRS
> book, page 802? I am working it on paper and was unsure as to what the
> "unique SMDS addressing characteristics" issue meant. Here is what I have
> so far..
>
> hostname HUB
> interface HSSI2/0
> encapsulation smds
>
> interface HSSI2/0.2 multipoint
> smds address C120.2202.0500
> ip address 172.16.10.1 255.255.255.0
> smds dxi
>
> hostname R1
> interface Serial0
> encapsulation smds
> smds address C120.2202.0501
> ip address 172.16.10.2
> smds dxi
>
> hostname R2
> interface Serial0
> encapsulation smds
> smds address C120.2202.0502
> ip address 172.16.10.3
> smds dxi
>
> Issues:
> From diagram, assuming that subinterface is required at hub, not a
> physical interface.
> Being that all three are on the same network, we would need multipoint at
> the hub, if point-to-point we would need separate ip subnets.
> Static mapping??
>
> smds static-map protocol protocol-address smds-address [broadcast]
> For IP, routing across the SMDS cloud is fully dynamic
>
>
> Thanks for any information!
>
> Cheryl Richardson
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:43 GMT-3