From: Chuah Eng Wee (chuahew@xxxxxxxxxxxxxxx)
Date: Thu Jul 22 1999 - 12:12:30 GMT-3
Hi Joe,
Thanks, it works after adding in promiscuous.
One more question on dlsw peer-on-demand command, when do we
need to use this command ??
Thanks
Eng Wee
At 07:47 22/07/99 -0400, Joe Soricelli wrote:
>Add promiscuous statements to r6 and r2
>------------------------------------------------------------------
> Joseph M. Soricelli, CCIE #4803, CCNP
> EMAIL: jsoricelli@ccci.com
>
> Chesapeake Computer Consultants, Inc.
> 8110 Gatehouse Road, Suite 101E Phone: (703) 207-0757
> Falls Church, VA 22042 Fax: (703) 207-0441
>
> FYI - About Chesapeake: We are a Cisco Certified Training and
> professional services partner. We offer most of the Cisco
> training courses as well as training for Fore, NetScout, and
> CheckPoint-1 Firewalls. We provide network consulting services,
> including design, network health, management, firewall,
> and problem solving. We now have 21 CCIEs on our staff
> of instructor/consultants.
>-------------------------------------------------------------------
>
>-----Original Message-----
>From: Chuah Eng Wee <chuahew@cyberway.com.sg>
>To: ccielab@groupstudy.com <ccielab@groupstudy.com>
>Date: Thursday, July 22, 1999 5:06 AM
>Subject: DLSW+ border peer
>
>
>>Hi..
>>
>>I am trying out DLSW with border peer. Setup as below :
>>
>>[r6]------------[r7]----------------[r1]---------------[r2]
>> 67.6 67.7 71.1 71.2 12.1 12.2
>>
>>r6, r7 peer group 70, r7 border peer
>>r1, r2 peer group 10, r1 border peer
>>
>>I have 2 PCs each at e0 of r6 and r2, but I cannot
>>find the computer using network neighborhood.
>>
>>Below config. Did I miss out anything ? Can anyone
>>explain what is peer-on-demand. I read the documentation,
>>but couldn't really understand.
>>
>>THanks
>>ENg Wee
>>
>>
>>
>>
>>r6 config
>>----------
>>dlsw local-peer peer-id 172.16.60.1 group 70
>>dlsw remote-peer 0 tcp 172.16.71.7
>>dlsw bridge-group 1
>>!
>>interface Ethernet0
>> ip address 172.16.60.1 255.255.255.0
>> bridge-group 1
>>
>>
>>r7 config
>>----------
>>dlsw local-peer peer-id 172.16.71.7 group 70 border promiscuous
>>dlsw remote-peer 0 tcp 172.16.71.1
>>
>>
>>r1 config
>>----------
>>dlsw local-peer peer-id 172.16.71.1 group 10 border promiscuous
>>dlsw remote-peer 0 tcp 172.16.71.7
>>
>>
>>
>>r2 config
>>----------
>>dlsw local-peer peer-id 172.16.20.1 group 10
>>dlsw remote-peer 0 tcp 172.16.71.1
>>dlsw bridge-group 1
>>!
>>interface Ethernet0
>> ip address 172.16.20.1 255.255.255.0
>> bridge-group 1
>>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:42 GMT-3